Neumann | Large Diaphragm Condenser Microphone | TLM 67
Transformerless Circuit | FET
TLM102 | TLM103 | TLM107 | TLM170R | TLM193 | TLM49 SET | TLM67 | U87AI | U87 AI Studio Set | U89i | USM 69i | U47 FET | U67 Set | M147 Tube | M149 Tube | M150 Tube | KMS104 | KMS105 | KM183 | KM184 | KM185 | KU100 | BCM104 | BCM705 | MA-1
香港行貨 | 現貨發售
接收任何形式消費券
The Sound of the 1960s Reinvented
The TLM 67 captures the spirit of Neumann’s classic U 67, which defined the sound of the 1960s. But instead of electron tubes the TLM 67 relies on trouble free FET electronics with a special sound design for a gorgeous retro tone. Like its predecessor, the TLM 67 is a versatile studio workhorse with three polar patterns, pad and low cut options.
Neumann | TLM 67
Acoustical operating principle Pressure gradient transducer Frequency Range 20 Hz ... 20 kHz Directional Pattern Omni/cardioid/figure-8 Sensitivity at 1 kHz into 1 kohm 10/18/9 mV/Pa (Omni/cardioid/8) Rated Impedance 50 ohms Rated load impedance 1 kohms Equivalent noise level, CCIR¹⁾ 29/24/30 dB (Omni/cardioid/8) Equivalent noise level, A-weighted¹⁾ 16/11/17 dB-A (Omni/cardioid/8) Typical SPL (tube characteristic) for K<0.5%²⁾ 110/105/111 dB (Omni/cardioid/8) Typical SPL (tube characteristic) for K<5%²⁾ 130/125/131 dB (Omni/cardioid/8) Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾ 65/70/64 dB Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾ 78/83/77 dB-A Maximum output voltage -1 dBu Supply voltage (P48, IEC 61938) P48 Current consumption (P48, IEC 61938) 3 mA Matching connector XLR 3 F Weight 490 g Diameter 56 mm Length 200 mm