top of page

The “it does everything” box.

The 517 provides a world-class transformer-coupled mic preamp, one-knob compression, DI circuitry with Vari-phase, Silk saturation and DI + mic blending capabilities – all in a single module.

 

香港行貨 | 現貨發售
接收任何形式消費券

Rupert Neve Designs | 517

HK$6,850.00價格
數量
  • FREQUENCY RESPONSE
    Mic Pre, Main Output, no load.
    -0.1 dB @ 10 Hz
    -1 dB @ 120 kHz

    DI Input, Main Output, no load.
    -0.1 dB @ 10 Hz
    -1 dB @ 120 kHz

    NOISE
    Measured at Main Output, unweighted, 22Hz - 22kHz, Terminated 150 Ohm. Noise specifications may vary depending on which 500 series chassis is being used, and / or interference from stray magnetic fields.
    With gain at unity: better than -100 dBu
    With gain at 66 dB: better than -60.5 dBu
    Equivalent Input Noise: better than -125 dBu

    DI
    With Gain @ Unity: Typically better than -100 dBu
    With Gain @ +30 dB: Typically better than -75 dBu

    HIGH PASS FILTER
    Frequency: 80 Hz
    Slope: 12 dB/Octave Bessel

    Microphone Input Impedance
    10,000 Ohm

    Instrument Input Impedance
    1.6 Meg Ohm (3.3 Meg Ohm balanced)

    Maximum Output Level
    Maximum output from 20 Hz to 40 kHz is +23 dBu.

    GAIN
    Mic Pre: Unity to +66 dB in 6 dB steps
    DI: Unity to +30 dB continuous

    Total Harmonic Distortion and Noise:
    @ 1 kHz, +20 dBu output: Main Output: Better than 0.001%
    @ 20 Hz, +20 dBu output: Main Output: Better than 0.002%
    Silk Engaged: Better than 0.2% Second harmonic

    VARI-PHASE
    @ 100 Hz: 2.9 degrees to 57.4 degrees
    @ 1 kHz: 33.5 degrees to 156 degrees
    @ 10 kHz: 149 degrees to -175 degrees

    PHANTOM POWER
    +48 Volts DC +/- 1% (provided by 500 Series Rack)

    POWER REQUIREMENTS
    Supplied by 500 series rack with 110-125 mA @ +/- 16V

    COMPRESSOR

    THRESHOLD

    Continuously Variable from -20 dBu to +10 dBu

    RATIO
    Fixed at 2:1

    ATTACK & RELEASE
    Fast Mode: Attack 5ms, Release 50ms
    Slow Mode: Attack 250ms, Release 500ms

    TOTAL HARMONIC DISTORTION
    Measured @ Main Output.

    MIC PREAMP AND DI
    @ 1 kHz, +20 dBu output: Better than 0.002%
    @ 20 Hz-20 kHz, +4 dBu output: Better than 0.02%

    SILK
    @ 20 Hz, +4 dBu output: Better than 0.5%
    @ 50 Hz, +4 dBu output: Better than 0.1%

全天候技術及產品支援 | 原廠保養最大信心保證

購物流程 | 運送方法

[購買流程] [付款方式] [訂單運送] [原廠保養] [技術支援]

相關產品

需要協助尋找最適合你的產品?

全天候免費技術支援,逾10年音響經驗,為你解答所有技術問題或硬件建議方案

bottom of page