top of page

Neumann | Studio Subwoofer | KH 750 DSP

 

KH 80 DSP | KH 120 A | KH 150 | KH 310A | KH 420 | KH 750 DSP | KH 810 | KH 870 | NDH 20 | NDH 30

 

香港行貨 | 現貨發售
接收任何形式消費券

 

DSP power for all

The compact KH 750 DSP is the ideal choice for smaller rooms and smaller studio monitors. It has a unique and flexible Bass Manager (2.0/0.1), analog and digital inputs, four routing modes and adaptable acoustical controls to be used in many different configurations.

In addition to its outstanding acoustic properties this DSP-based subwoofer offers functions for the Neumann monitors connected to its outputs regarding the interplay with the following tools:

  • Automatic Monitor Alignment – Automatic room correction of stereo systems using the Neumann MA 1 measurement microphone (software for Mac/PC)
  • For the alignment of multichannel setups, we offer the multichannel option for the MA 1 software.

This also applies to all non DSP-based Neumann monitors connected (analog) to the KH 750 DSP, which enables them to make use of the subwoofer’s DSP power.

Neumann | KH 750 DSP

HK$13,800.00Price
Quantity
  • Acoustics
    Free field frequency response ±6 dB 16 ... 800 Hz
    Free field frequency response ±3 dB 18 … 750 Hz
    Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) <20 dB(A) SPL
    Sine wave output with a THD < 0.5 % at 1 m in half space 95 dB SPL (>70 Hz)
    Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) 105.0 dB SPL
    Dolby DARDT. Max SPL bass managed 113 dB
    Acoustical Principle Sealed
    Analog Inputs and Outputs
    Analog input(s) 2 x XLR: analog electronically balanced
    Analog input impedance >13k Ohms
    Max. input level +24 dBu
    Common mode rejection ratio (CMRR) > 56 dB @ 15 kHz
    Max. input level < +24 dBu
    Common mode rejection ratio (CMRR) > 56 dB @ 15 kHz
    Volume control via Neumann.Control software
    Volume control range; resolution 0 … -∞ dB; 0.1 dB
    Analog dynamic range; THD+N (A-D-A) 119 dB(A); <0.003% (-90 dB)
    Digital Inputs and Outputs
    Digital input(s) BNC (75 Ω): AES3; S/P-DIF
    Digital output(s) BNC (75 Ω): AES3
    Digital converter: resolution; design 16 … 24-bit DAC; Δ∑
    Digital converter: sampling rate 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz
    Digital internal sampling rate 48 kHz
    Output sampling rate 48 kHz
    Dynamic range A-D-A (Converter) >120 dB(A)
    Dynamic range D-A >123 dB(A)
    Digital sensitivity -18 dBFS = 100 dB SPL at 1 m
    Latency ADA / DA 1.5 ms (A-D-A linear phase); 1.2 ms (D-A linear phase)
    Delay: User adjustable delay range 0 ... 100 ms and 2 x 0 ... 20.8 ms
    Delay: Resolution: time; distance 0.1 ms; 3.44 cm (1 3/8”)
    Delay: Max. frames Audio-video synchronisation (lip sync) 2.5 (40 ms) frames; 3 (33 ms) frames
    Delay: Time-of-flight maximum distance 2 x 7.16 m (23' 5")
    Use Interfaces /Backplate)
    Input gain control (sensitivity) +2 ... -12 dB
    Output level control (output level in 1 m based on 0 dBu input level) 94; 100; 108; 114 dB SPL
    Input Select BNC (75 Ω): AES3; S/P-DIF
    Electronics - Controller
    Controller design Digital; active
    Crossover frequency 80 Hz fixed or 60 ... 100 Hz via Neumann.Control
    Crossover slope 24 dB/oct; 4th order
    Equalization: via Neumann.Control software 8 x full parametric IIR + low / high shelf global balance
    Automatic room calibration via MA 1 via PAK 1 accessory and Neumann.Control software
    FIR phase correction on outputs: Linear phase (170 Hz ... 16 kHz; +/- 45°); Analog emulation
    Protection circuitry Peak limiter Amplifier thermo limiter woofer temperature limiter electronics temperature limiter power supply temperature limiter power amplifier temperature protection amplifier over current protection amplifier over current protection power supply
    Infrasonic filter: frequency; slope 6,5 Hz; 12 dB/oct.
    Remote control Neumann.Control software via an RJ45 connector carrying standard IP data
    Display: On; Normal Operation Green LED
    Display: Identification Flashing red LED
    Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute Red LED
    Electronics - Amplifiers and Power Supply
    Output power woofer amplifier (THD+N with limiter deactivated: 10%) 256 W
    Mains Power Supply: input voltage; frequency SMPS: 100-240 V; 50/60 Hz
    Power consumption (230 V / 100 V): Standby <300 mW
    Power consumption (230 V / 100 V): Idle 18 W
    Power consumption (230 V / 100 V): Full output 410 W
    Standby Disabled; 90 mins (default); user defined in software
    Mechanics
    Cabinet material Wood cabinet, aluminum electronics panel
    Cabinet surface finish; color (front / back) Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
    Operating conditions +10° C to +40° C (+50° F to +104° F); <75% RH, non-condensing
    Transport/storage conditions -25° C to +60° C (-13° F to 140° F); <90% RH; non-condensing
    Woofer 265 mm (10") with protecting black metal grille
    Product dimensions (height x width x depth) 383 x 330 x 383 mm (15 1/8" x 13" x 15 1/8")
    External net volume 48.4 liters
    Product weight 19.5 kg (43 lbs)
    Packed dimensions (height x width x depth), mm (inches) 515 X 395 X 490 mm
    Packed weight 22.0 kg (48 lbs 8 oz)
    Packed cube 0.100 m³
    Delivery includes 1 x KH 750 DSP G Mains cable(s) - depending on variant: EU; UK; US; CCC; KC, 1 x Getting Started Quickly guide, 1 x Operating Manual
    Acoustical Axis horizontal 165 mm
    Acoustical Axis vertical (from bottom) 192 mm

全天候技術及產品支援 | 原廠保養最大信心保證

購物流程 | 運送方法

[購買流程] [付款方式] [訂單運送] [原廠保養] [技術支援]

You may also like

需要協助尋找最適合你的產品?

全天候免費技術支援,逾10年音響經驗,為你解答所有技術問題或硬件建議方案

bottom of page